Why do some floors start showing signs of wear much earlier than expected? Why do tiles that look beautiful in a showroom sometimes disappoint after installation? And why does a seemingly affordable flooring decision end up costing more than planned?
The problem isn’t always poor-quality tiles. Sometimes, it’s how they’re selected.
When it comes to Full Body Vitrified Tiles, there's more to selecting them than just comparing colours, sizes and costs for architects, contractors and buyers. Even the smallest choosing mistake can lead to years of complaints about maintenance, replacements or costly repairs.
The five most common mistakes when selecting full body vitrified tiles are choosing designs without considering applications, assuming thicker tiles are always better, overlooking surface finish and slip resistance, ordering insufficient quantities, and comparing prices without checking technical specifications. Avoiding these mistakes helps buyers select flooring that better matches the project's performance, safety and maintenance requirements.
What Are Full Body Vitrified Tiles?
Full body vitrified tiles are vitrified tiles in which the colour and material composition extend through the tile body rather than relying solely on a decorative surface layer. They are commonly considered for residential, commercial and high-traffic flooring applications. However, their suitability depends on factors such as breaking strength, surface finish, slip resistance, thickness and installation conditions.
Where Do Buyers Usually Go Wrong?
Full Body Vitrified Tiles are valued for their strength, through-body colour and suitability for demanding applications. But these advantages only matter when the right tile is selected for the right space.
And that’s where buyers sometimes get it wrong.
1. Falling in Love with the Design, Forgetting the Floor
A tile's colour, texture and finish can immediately attract attention in a showroom. But a design that looks impressive on a sample board may not be suitable for every flooring application.
However, the method of tile usage is never discussed. A lobby, hall of a shopping mall and garage need different flooring types, so the tile should not be chosen according to the appearance only, as it might cause problems in the future. Therefore, it is important to assess wear resistance, surface properties and maintenance requirements in addition to design.
For example, tiles selected for a residential living room may have different performance requirements from those used in a shopping mall corridor, commercial entrance or parking area. Buyers should evaluate expected foot traffic, moisture exposure, cleaning frequency and the technical performance required for each location.
2. Assuming Thicker Always Means Better
There’s a common belief that thicker tiles automatically mean stronger floors.
So, if 9 mm is good, 15 mm must be better. Right?
Not necessarily.
The thickness of the tiles is one of the important aspects which need to be considered. However, another important aspect is performance. One has to take into consideration different aspects like the strength of the tile, how the tile has been installed, type of the substrate as well as the intended use.
For example, a 9 mm tile may be suitable for certain indoor flooring applications when its technical properties and installation conditions meet the project requirements. A 15 mm tile may be considered for applications requiring different performance characteristics, but thickness alone does not establish load-bearing suitability. Buyers must also evaluate breaking strength, substrate preparation, installation method and expected loads.
In this case it is logical to choose thickness according to the required load rather than thickness only.
3. Treating Every Surface Finish the Same
A polished floor can make a reception area look fantastic.
Now imagine carrying that same finish into an exposed entrance walkway during the monsoon.
Suddenly, appearance isn’t your biggest concern. Different surface finishes serve different purposes. While polished tiles can create a refined indoor appearance, wet or outdoor areas need appropriate slip resistance.
This becomes especially important for commercial spaces where safety and daily movement cannot be overlooked. Before approving Full Body Vitrified Tiles, check whether the selected finish is appropriate for the location. A floor shouldn’t become difficult to use just because someone wanted everything to match.
4. Ordering Exactly What the Drawing Says
The flooring plan requires 2,000 square metres.
So, the buyer orders exactly 2,000 square metres.
Sounds efficient.
Until installation begins.
Tiles need cutting around corners, columns and doorways. Some pieces may break during handling. Additional material may be needed for future repairs.
Without a reasonable allowance, even a small shortage can delay completion. And ordering the same design later may introduce shade or batch differences. That’s why buyers should calculate quantities with the contractor, allowing for layout, cutting, handling and spare material. The required allowance depends on tile size, laying pattern and site conditions.
Buying only the exact measured area isn’t always saving money. Sometimes, it’s creating the next purchase order.
5. Comparing Prices Without Comparing Specifications
Two suppliers offer similar-looking tiles.
One quotation is cheaper.
Naturally, it gets attention.
But are both products technically comparable?
What about dimensional tolerances, water absorption, breaking strength, surface finish and quality consistency? A lower price means very little if the selected product doesn’t meet the project’s requirements. For large orders, also consider packaging, delivery schedules, shade consistency and repeat-order availability.
A reliable manufacturer should help buyers understand the specifications behind the quotation. Because the real cost of flooring isn’t limited to what appears on the invoice. It includes installation, upkeep and the consequences of choosing incorrectly.
Why Choose Famous Vitrified Tiles?
Famous Vitrified, based in Morbi, offers a range of Full Body Vitrified Tiles for residential, commercial and outdoor applications. With over 30 years of industry experience, our product portfolio includes:
- Full Body Vitrified Tiles
- Digital Full Body Tiles
- Anti-Skid Full Body Tiles
- Heavy-duty Parking Tiles
- Plain, Punch and Terrazzo collections
- 600×600 mm and 600×1200 mm formats
- 9 mm and 15 mm options across relevant ranges
Buyers can explore product collections, technical specifications and application-specific options before finalising their requirements.
The Right Tile Is Worth More Than a Good Deal
Most flooring mistakes are easier to prevent than repair. A little more attention to application, thickness, finish, quantity and technical specifications can save considerable trouble later. So, before choosing Full Body Vitrified Tiles, ask yourself one question: Will this tile still make sense after the project is completed? Explore the Famous Vitrified catalogue and contact the team for product specifications, bulk pricing and project requirements.
Frequently Asked Questions
Buyers should evaluate the intended application, thickness, breaking strength, surface finish, slip resistance, dimensions, shade consistency and installation requirements. Technical specifications should be checked before placing bulk orders.
No. Thickness is one consideration, but suitability also depends on the tile's tested properties, expected loads, substrate and installation system.
Certain products may be suitable for parking applications when designed and tested for the expected loads and conditions. Buyers should verify the specific product's technical data and installation requirements.
No. Full body construction does not automatically provide slip resistance. Slip performance depends on the tile's surface characteristics and should be verified for the intended conditions.
Batch consistency helps maintain a uniform appearance across large flooring areas. Buyers should confirm shade, calibre, batch identification and replacement availability when planning project quantities.
Buyers should evaluate the intended application, thickness, breaking strength, surface finish, slip resistance, dimensions, shade consistency and installation requirements. Technical specifications should be checked before placing bulk orders.
No. Thickness is one consideration, but suitability also depends on the tile's tested properties, expected loads, substrate and installation system.
Certain products may be suitable for parking applications when designed and tested for the expected loads and conditions. Buyers should verify the specific product's technical data and installation requirements.
No. Full body construction does not automatically provide slip resistance. Slip performance depends on the tile's surface characteristics and should be verified for the intended conditions.
Batch consistency helps maintain a uniform appearance across large flooring areas. Buyers should confirm shade, calibre, batch identification and replacement availability when planning project quantities.
Previous Blog